Decorative fireplace made of polystyrene foam. Foam fireplace: assembly and installation of a budget decorative design

Caring housewives try to make the family home an inviting haven where you can hide from everyday worries. To do this, they come up with all sorts of creative delights. Often everything new is well forgotten old. Once upon a time it was impossible to imagine a house without a fireplace. Today it will be replaced by a fireplace made of polystyrene foam, reminiscent of an integral part of the old house. It creates an unforgettable comfort, on which it often depends good mood all inhabitants.

A false fireplace made of foam plastic brings an unforgettable coziness, on which the good mood of all the inhabitants of the house often depends

Design selection

Making a false fireplace out of polystyrene foam with your own hands is not so difficult if you think through the whole process of work well. They usually start by choosing the style of the future part of the interior. Because it must be in harmony with environment, choose the most suitable option.

Here are just a few possible directions:

Having sorted out the styles, the owner should pay attention to the one that best matches the overall design of the house. Although a fireplace can serve as an accent in the interior, if it irritates you every day with its inconsistency overall design, then comfort will become an unattainable goal. Therefore, close attention is paid to the issue of choosing a style.

Preparation for production

Before choosing a fireplace style, decide where it will be located. The installation location is very important for further work. This could be the center of the wall, the corner of the room, or some other original version placement. Depending on the location and surrounding interior, the type of fireplace is selected.

Having decided on the style, they begin sketching the future design. To do this, use either finished projects, or are developing a personal one. At this stage, they try to imagine what the future structure will look like in the original. Many people use special computer programs for volumetric modeling.

When the sketch is ready, they determine what the future fireplace will be made of.

There are several options for solving this problem:

• cardboard and fiberboard;
• wood and plywood;
• Styrofoam;
• other materials.

The frame of a false fireplace made of polystyrene foam is the easiest to make at home, as it is affordable and easy to process

Some craftsmen use mixed materials, but many choose foam plastic. A decorative fireplace made of polystyrene foam is the easiest to make, as it is affordable and easy to process at home. To use it, you just need to get a sharp knife or build a simple electrical device for cutting foam parts.

Also before starting assembly experienced craftsmen make an accurate drawing future building with detailed dimensions of all parts. Sometimes they make a paper model and try it on on the spot so as not to make mistakes with the values. Only after making sure that the calculations are correct do they begin to assemble the fireplace portal from foam plastic.

Assembly and care

Having done everything preparatory work, begin production. The installation principle and work sequence are very similar, regardless of the chosen style and option.

Scheme of a false fireplace made of polystyrene foam

Here is a diagram for assembling a simple classic fireplace portal from foam plastic using other materials:

1. A wooden rectangular frame made of thin bars is installed along the height and width of the fireplace.
2. Take a large cardboard box from under the refrigerator or washing machine and make the lining of the future building out of it.
3. Thick plywood is used to make a cover on top of the fireplace.
4. “Bricks” are made from polystyrene foam, painted and dried.
5. Foam bricks are glued onto a cardboard base.
6. Paint the fireplace shelf to imitate brickwork on it.
7. Equip the hearth with an artificial light or other fire simulator.

The assembly diagram is very simple, so it will not be difficult to cope with it. When the fireplace is ready, they try to decorate it with additional decor. Most often they decorate the top shelf and the inside of the structure.

Various devices are invented to simulate fire. For example, install a mini-fan under a rag fire. Followers modern technologies They install a large monitor with imitation fire in the hearth. Some people install fireplace-type electric heaters. There are many options, so the owner decides which one to choose.

By installing an imitation fireplace in the house, homeowners will be able to enjoy that unique feeling of comfort and warmth that comes from the hearth. Such a home will attract its inhabitants and bring them closer to each other.

Every person wants to make the space in their home as cozy, comfortable and enjoyable to live as possible. Interior design, furniture, curtains and textiles, decorative elements and accessories help us with this. One of the favorite decorative elements of many city residents is false fireplaces, which are safe analogues of real systems with live fire.

Anyone can build a fake fireplace, there is nothing complicated about it, and the most important thing is that it can be created from completely different materials. We have already talked about how, and today we’ll talk about how to build a false fireplace from polystyrene foam.

White fireplace replica with beautiful finishes

Foam product

Building a fireplace from sheets and pieces of polystyrene foam is perhaps the easiest way. This is a pliable material that is very easy to work with, create various three-dimensional images, interesting contours. In addition, the cost of foam plastic sheets is low, so we do not need a large budget to build such a structure.

In order to build a foam fireplace with your own hands, we will need:

• Cardboard box big size, or large sheets of cardboard. From this material it will be possible to make a durable frame. If you take a box from a refrigerator or other massive household appliances, then you can build a large structure that will be very similar to the original.
• Sheets of foam plastic, usually they have a thickness of about 1-1.5 centimeters.
• Scotch tape or crepe (painting tape), glue, construction knife, tape measure, marker, to create a strong structure of the correct shape, you definitely need measuring tools.
• Putty and paint for finishing the finished fireplace mock-up.
• Decorative elements made of polystyrene foam or polyurethane, in order to create a frame and decent appearance.

To make the product work the right size and shapes, before starting work you should measure the space allocated for the foam fireplace, make a drawing or general sketch. The shape and appearance of a false fireplace can be seen on the Internet.

Easy to build artificial fireplace

Having a ready-made drawing, you can easily transfer it to the prepared cardboard. A general frame is created from cardboard. The inside of the cardboard box is cut and folded inward, thus achieving the desired volume. If you need to do corner option, then the cardboard will have to be carefully marked and cut into more complex scheme. Using tape and glue, the structure is fixed. Make sure that it stands level on the floor and does not fall to the side. Make a strong base.

When the frame is ready, it is covered with foam plastic, which is cut into pieces from sheets. This way, the desired volume and shape of the future fireplace is obtained. You can also use foam plastic as a tabletop, which is placed on top of the structure, or saw off a piece of plywood.

To consolidate the result obtained, the foam fireplace is puttied. This can be done with universal putty, which is sold at any hardware store. Now to complete the image, all that remains is to paint the resulting foam portal. Acrylic or odorless water-based paints are ideal for painting. You can make any color, or you can leave the standard white.

The firebox of a foam fireplace is filled differently:

• The easiest option is to draw fire on the canvas and fix it inside.
• using a fan and cloth.
• If you want the firebox to glow, just place an LED garland or electric candles in it. To enhance the glow effect, you can place mirrors in the firebox, gluing them to the walls.
• By filling the cavity with decorative firewood and spruce branches, we get a pleasant appearance and a light pine aroma.
• Beautiful stones, fir cones, and real firewood are often used.
• Ultimately, you can always put beautiful candles inside, and next to artificial fireplace chandelier.

By building a fireplace from polystyrene foam with your own hands, you will receive great satisfaction from the work done and the final result. It will certainly bring comfort, coziness and tranquility to your home. The most important thing is to choose the right style for the future product at the sketch development stage.

If you are thinking about a false fireplace, in our article you will find the most detailed instructions on how to create a false fireplace with your own hands from plasterboard, wood, polystyrene foam, as well as a huge number of photos of false fireplaces in the interior for inspiration.

Find what you need

using the content.

False fireplace made of plasterboard: step-by-step assembly instructions

The first stage is preparation of tools and materials

Tools and materials for work

Start by preparing your kit for work. First of all, you will need the drywall itself. When choosing a material, be guided by the features of the selected finishing cladding. If you plan to finish with tiles, it is better to buy a moisture-resistant modification of drywall.

Types of guides for drywall

Profiles

To fasten the frame elements, buy self-tapping screws. The recommended length of the fasteners is 1.4-1.6 cm. You also need to buy self-tapping screws with a countersunk head for fixing the sheets. In addition, you need to purchase dowel nails for attaching profiles to the floor and walls.

Types of self-tapping screws for profiles

Next, focus on the features of the selected finish. If you are going to wallpaper or paint the portal, purchase a primer and putty. If the false fireplace will be tiled, buy tile adhesive and grout for the joints.

Select the required amount of materials individually, taking into account the dimensions of the future decorative fireplace. Plasterboard construction can have a wide variety of sizes. When choosing specific option Focus on available space and personal preferences.

Drywall sheets

Kit necessary tools includes:

• screwdriver;
• electric drill;
• scissors for cutting metal;
• level;
• roulette

The second stage - installation of the frame

First step. Mark the walls and floor to install the profiles. Work according to the drawing. Place marks taking into account the selected dimensions of the fireplace.

Second step. Secure the guides along the marked lines. If you are fixing it to a concrete surface, first attach the profile to the base, drill holes according to the markings, insert dowels into them and after that attach the guides.

Third step. Install the posts into the guides. Fasten the products using self-tapping screws.

Before attaching the profiles, it is recommended to check the evenness of the wall using a plumb line. If deviations are detected, fix the guides using direct hangers. These products will allow installation of products strictly vertically.

First, assemble the frame for the entire structure, then for the portal with a recess for the “firebox”. To give the base greater rigidity, connect long horizontal profiles and vertical posts with additional jumpers.

Frame

If desired, you can give the firebox opening curly shape. To do this, just carefully cut through the stiffening ribs of the mounting profile and bend the product in accordance with your idea.

Frame

The third stage - lining the frame with plasterboard

How to properly attach drywall to a profile

Mark the sheet according to the dimensions of the fireplace and cut out necessary details. To cut the material, it is most convenient to use an electric jigsaw. If this is not available, cut with a simple wallpaper knife. In this case, you will need to first cut the cardboard layer on one side of the sheet, carefully break the board, and then cut the second layer of cardboard.

Fix the sheathing elements to the frame. Screw the screws into the material so that their heads are slightly recessed. The recommended spacing of fasteners is 100-150 mm.

Drywall sheets are attached to the frame using self-tapping screws

There shouldn't be any problems attaching the sheets. Even without such experience, you can cope with the sheathing. Just remember that drywall is a relatively fragile material, so try not to drop it and do not press too hard on the screwdriver when screwing in the fasteners.

Video: DIY plasterboard fireplace

Stage four - finishing

Having covered the frame with sheets of plasterboard, all you have to do is complete the finishing decoration of the structure. When choosing a finishing option, focus primarily on the design features of the room as a whole.

Plasterboard fireplace

Most often, plasterboard is used for cladding false fireplaces. fake diamond, decorative brick and ceramic tiles. To attach finishing elements, tile adhesive or liquid nails are used. When tiling using tiles of the correct shape, lay them with equal gaps. To decorate them, use special plastic crosses.

Decorative fireplace finishing option

Brick or stone finishing is unlikely to fit into modern interior. In such a situation, it is best to use paint or decorative plaster. The surface must first be carefully treated with putty, sealing the joints between the sheathing elements and eliminating any kind of unevenness. After puttying, the surfaces are additionally sanded with sandpaper.

Otherwise, when choosing a finishing option, be guided by your taste preferences.

Finally, all you have to do is install an electric fireplace in the “firebox” opening or decorate the free space at your discretion. For example, instead of installing an electric fireplace, you can install warm and soft lighting in the firebox - an excellent option for classic interior. A more modern and bold solution is to decorate the “firebox” using multi-colored LED strip.

You can use a mirror to decorate the back wall of the firebox. Attach it to the surface, and line the bottom of the firebox with decorative logs or other material, for example, shells and pebbles.

There is a mirror in the firebox

Installing several candles in the firebox different shapes and size, you will create a real fire in your fireplace.

Hearth Decoration

Raised fireplace made of wood, plywood, chipboard

How to build an artificial fireplace from plywood, chipboard, various types wood with your own hands, read on.

Preparatory work

It is worth noting that the false fireplace is a portal of impressive size, which is properly decorated inside and out. This portal can become a separate decorative element or a frame for an electric fireplace that provides heat, a biofireplace, which allows you to create a real fire in the firebox. If a portal is created for a bio-fireplace in which a real fire will burn, then you should carefully select materials for the firebox, since they must be fireproof. If a false fireplace is designed to decorate an electric fireplace, then the size of its firebox must correspond to the dimensions of the device. Additionally, electrical wiring should be carried out and sockets should be placed in the area of ​​the proposed structure.

A well-drawn sketch and worked out dimensions of the future product will help you correctly navigate the amount of building material. Everything you need should be purchased at construction stores, while some fireplace parts, such as fasteners or hardware, can be found at home.

Construction material

Let's start assembling the frame

Frame assembly proceeds from bottom to top

Finished false fireplace frame

Ready-made false fireplace design

Painting a false fireplace

Ready-made false fireplace in the room

Top box for equipment

Side storage drawers

Decorative false fireplace

Wooden false fireplace

Application of chipboard

Chipboard will be a strong and easy-to-use material for creating a structure. In our case, the laminated option is perfect - laminated chipboard, which will minimize the finishing of the future false fireplace.

The only drawback that immediately comes to mind when using laminated chipboard is its vulnerable appearance. You should be careful when storing the elements of the slab and building a structure from it, so as not to damage the laminated surface, since it will no longer be possible to repair it.

You can cut the material into pieces of the required size yourself, or order it from a suitable furniture workshop. If we are talking about chipboard or plywood, then doing the work yourself will not be difficult, the main thing is to use a good jigsaw. With laminated material it is a little more complicated; here it is important not only to make a cut, but also to take into account the pattern of the fibers, so it is more convenient and easier to order cutting the sheet into the required pieces in a workshop. Moreover, you will not need to take away a huge sheet of chipboard; you will immediately pick up the finished elements.

Fireplace portal made of laminated chipboard

In addition, you should ask to process the edges of the slab so that the elements look monolithic. At home, edge processing can also be done using an iron and a special tape. However, the accuracy of this method is entirely up to you. When you have all the structural elements, fasteners and hardware in your hands, you should start assembling:

• Based on the sketch, it is necessary to prepare the frame of the false fireplace. It is most convenient to knock it together from timber or fasten it from a metal profile. When assembling a fireplace with your own hands from scrap materials, you should pay attention to the rigidity of the structure and its solidity, so we securely fasten the frame to the wall and floor.
• Then the resulting structure should be sheathed with cut chipboard parts. When performing work, you must be extremely careful not to damage decorative coating.
• If the fireplace cabinet is made of laminated chipboard, then further decoration will affect only its internal part, but when creating a false portal for a fireplace with your own hands from ordinary chipboard or plywood, you should take care of the finishing of the structure. The finishing of a false fireplace can be done different materials, for example, you can cover the structure with plastic brick-like panels or wallpaper with a similar pattern, or use decorative rock, which is glued to the portal with a solution. Acceptable to use ceramic tiles, mosaic and other tiles, especially if you plan to install a bioburner inside the portal. If you stick to the wooden style, then in specialized stores you can buy the appropriate wooden elements with carved patterns and decorate your home with them. decorative fireplace. Subsequently, the wooden elements can be coated with stain or varnish.
• At the final stage, you should decorate the firebox of the false fireplace. There are many ways to make an artificial fire, but you can do without it, for example, by placing decorative firewood in niches or placing candles. Here everything will depend on your imagination and thoroughness of approach.

Wooden version

If you need to build a more substantial structure, you can build a decorative fireplace made of wood. Wood means timber and board. It is quite possible to build a fireplace out of wood with your own hands, because, as in the case of chipboard and plywood, there are no particular difficulties in this.

Finishing material

Frame construction

Primary finishing of the fireplace firebox

Finishing

Carrying out finishing

Construction of the main portal

Painting and decorating a false fireplace

Another wooden option

Building a frame

Tools and hardware

The method for assembling a wooden structure is as follows:

• A correct and clearly formed drawing will allow you to purchase required material and cut it into parts. If you make a short description and indicate the dimensions of each element, it will be even easier to assemble a false fireplace.
• Next, the main frame is assembled from timber, to which the remaining elements are attached. When assembling a fireplace from boards with your own hands, you should use several methods of fastening materials: somewhere tongues, somewhere gluing, and somewhere connecting with hardware. The connection is selected based on the required strength and influence on the entire structure.
• If you put together the entire portal from boards, it will turn out to be too massive, so in some places we use plywood. To make a wooden false fireplace look decent, we create decorative elements and moldings from the bars and nail them to the frame.
• Once the body is assembled, you can begin finishing it. How to decorate a false fireplace, the easiest option is to paint it with white paint in several layers. The result will be a stately structure with a classic look. You can use the methods described earlier, they will also be relevant.

To make your false wooden fireplace look complete, you should start decorating its firebox. The best option in this case, the use of natural and decorative accessories is considered, for example, you can fill a niche with fir branches, pine cones and candles, or put real dry firewood.

Video: False fireplace made of wood

False fireplace made of foam plastic

• Building a fireplace from sheets and pieces of polystyrene foam is perhaps the easiest way. This is a pliable material that is very easy to work with, create various three-dimensional images, interesting contours. In addition, the cost of foam plastic sheets is low, so we do not need a large budget to build such a structure. In order to build a foam fireplace with your own hands, we will need:
• Large cardboard box or large sheets of cardboard. From this material it will be possible to make a durable frame. If you take a box from a refrigerator or other massive household appliance, you can build a large structure that will be very similar to the original.
• Sheets of foam plastic, usually they have a thickness of about 1-1.5 centimeters.
• Scotch tape or crepe (painting tape), glue, construction knife, tape measure, marker, to create a strong structure of the correct shape, you definitely need measuring tools.
• Putty and paint for finishing the finished fireplace mock-up.
• Decorative elements made of polystyrene foam or polyurethane to create a frame and a decent appearance.

In order for the product to be the desired size and shape, before starting work you should measure the space allocated for the foam fireplace and make a drawing or general sketch. The shape and appearance of a false fireplace can be seen on the Internet.

• An easy-to-build artificial fireplace Having a ready-made drawing, you can easily transfer it to prepared cardboard. A general frame is created from cardboard. The inside of the cardboard box is cut and folded inward, thus achieving the desired volume. If you want to make a corner option, then the cardboard will have to be carefully marked and cut according to a more complex pattern. Using tape and glue, the structure is fixed. Make sure that it stands level on the floor and does not fall to the side. Make a strong base.

When the frame is ready, it is covered with foam plastic, which is cut into pieces from sheets. This way, the desired volume and shape of the future fireplace is obtained. You can also use foam plastic as a tabletop, which is placed on top of the structure, or saw off a piece of plywood.

To consolidate the result obtained, the foam fireplace is puttied. This can be done with universal putty, which is sold at any hardware store. Now to complete the image, all that remains is to paint the resulting foam portal. Acrylic or odorless water-based paints are ideal for painting. You can make any color, or you can leave the standard white.

When completing work on the false fireplace, you should decorate it. This can be done using plastic and polyurethane elements. For example, glue a beautiful molding around the perimeter, and decorative elements in the form of columns or other types of stucco molding on the edges. Fireplace moldings, stucco, corners and other decorative elements can be purchased at any hardware store.

Ready to use fake fireplace

If you want to decorate a false fireplace made of cardboard and foam plastic so that it looks like a real brick one, then you can use three options:

• Cover it with plastic panels imitating brick or stonework.
• Paste over the frame vinyl wallpaper with a similar pattern. As a last resort, paper analogues.
• Apply a pattern of brickwork using improvised means. At the final stage of work, we decorate the area inside the portal, as well as the area around it.

• Cover it with plastic panels imitating brick or stonework. Cover the frame with vinyl wallpaper with a similar pattern. As a last resort, paper analogues. Apply a pattern of brickwork using improvised means. At the final stage of work, we decorate the area inside the portal, as well as the area around it. We cut them to size We begin to assemble the frame We install all the frame parts We fill the cavities with foam plastic

Preparing suitable boards

Cut them to size

Let's start assembling the frame

We install all the frame parts

Filling cavities with foam plastic

Let's start the exterior finishing

The frame is covered with foam plastic

We paint foam plastic under coals

Painting the outer foam

Installing the monitor

Ready-made false fireplace with fire inside

• The firebox of a foam fireplace is filled differently:
• The simplest option is to draw fire on the canvas and fix it inside.
• It's easy to make an artificial fire using a fan and fabric.
• If you want the firebox to glow, just place an LED garland or electric candles in it. To enhance the glow effect, you can place mirrors in the firebox, gluing them to the walls.
• By filling the cavity with decorative firewood and spruce branches, we get a pleasant appearance and a light pine aroma.
• Beautiful stones, fir cones, and real firewood are often used.
• Ultimately, you can always put beautiful candles inside and a candelabra next to the faux fireplace.

Corner false fireplace

Preparatory activities The design of a false fireplace, be it corner or rectangular, usually requires the presence of two basic elements: portal and apparatus inside. A portal is a massive structure designed to imitate a stove, and the apparatus can be a bio-fireplace burner or an electric fireplace. In principle, you don’t have to install the device inside, then the firebox can be easily decorated with firewood, candles, fir branches or other decorative elements.

The most reliable, strong, but at the same time easy-to-handle material from which you can build your portal, fireplace frame, is plasterboard. This material is easy to use, light in weight and versatile.

In the future, you can easily attach any decorative coating to a plasterboard base: tiles, mosaic, plaster stucco, plastic panels with imitation brickwork, whatever. Before starting work, it is advisable to choose a suitable place where the false fireplace would fit perfectly. Many people choose a corner fireplace because it takes up less space. free space. An excellent solution would be to place a dummy opposite front door in an unused corner. With this arrangement, the fireplace immediately becomes the main accent in the interior of the room, the center of attention.

A simple sketch of a future fireplace

At the final stage of preparation, you should collect the tools necessary for construction and suitable Construction Materials. Let's briefly go over the materials, you will definitely need:

• Metal profile for the construction of a frame for drywall.
• To do robust construction You will need screws for metal and wood to secure the drywall.
• Drywall for covering the frame and creating the shape of a false fireplace.
• Plaster will be required to level the corners and recesses from self-tapping screws.
• To prepare for tiling, you will need a primer. It is also better to prime the drywall before painting.
• At the preparation stage, you should decide what will be produced finishing and purchase the appropriate material: tiles, plastic panels, mosaics.

Additionally, various decorative elements may be needed: corners, moldings and more.

Successful placement of an imitation of a real fireplace

To make a corner fireplace from plasterboard, you will need construction tools:

• For marking you will need a pencil or marker, ruler, tape measure, level, plumb line.
• For basic work you will need a screwdriver, hammer drill, jigsaw, construction knife, metal scissors, pliers, screwdriver, hammer.
• Other tools may also be useful, it all depends on the complexity of the structure and the methods of finishing it.

Step-by-step instructions will help you navigate the construction methodology:

Fastening the metal profile to the floor and wall

• At the first stage, we need to make markings on the floor and wall, based on a drawing or sketch of the fireplace made on paper. To better see the markings, use a marker, and for accuracy, use a ruler and level. It is very important not to make serious mistakes when marking.
• If you plan to install an electric device inside the corner portal of your false fireplace, then you need to supply electricity to the corner. The easiest way is to make an outlet behind the fireplace, where an electric fireplace or other built-in device will be connected.

The fireplace takes on a general shape

• The markings are ready, we will carry out further work with our own hands. Let's take it metallic profile and build from it necessary design. We use the floor and walls as the basis for fastening. If necessary, make rounded elements, cut the profile and bend it.

Drywall-clad fireplace frame

• When the frame is built, we begin to work with drywall. We need to cut the large sheet into small pieces according to the dimensions on the drawing, and then attach these pieces of drywall to metal frame. As we have already said, when making a corner fireplace from plasterboard with your own hands, you need to carefully monitor the dimensions so as not to waste material. Note that the self-tapping screws should be screwed in completely and even sunk a little into soft drywall so that their heads are not visible later.

Finishing the fireplace with suitable decorative materials

• When the drywall is fixed, you need to take putty and modify the image of the fireplace and its shape. You should cover the recesses of the screws, make even corners and joints. When the putty dries, you can use a knife and sandpaper to make the surface more ideal. Finally, it is necessary to treat the drywall and putty with a primer to make it easier to attach the finishing materials, or to paint the resulting false fireplace.

The exterior of the fireplace is finished

• Having built the base of the structure, you can proceed directly to its external and internal decoration. It's better to start with the firebox. If you plan to install any device inside, you should do the appropriate finishing. For example, if a bio-fireplace burner or real candles are installed, then the base should be strengthened by laying tiles down, and the inside of the firebox should be finished with heat-resistant material, asbestos, or steel. If the firebox is empty, finishing can be done at will from any materials.

Exterior view of the corner fireplace in the room

• After the firebox, we move on to the main external part. To decorate a corner fireplace, you can use ceramic tiles, stone or its imitation, plastic panels, siding, there are many options. Decorative material is glued to the frame using glue. This glue usually dries in about a day.
• A tabletop should be installed on the top of the frame; you can choose a wooden or stone option, depending on your preferences. You can later place decorative items and souvenirs on this tabletop.

Filling the fireplace insert with decorative elements

Note that in addition to expensive finishing materials there is quite budget options. For example, a fireplace in the corner of a room can simply be painted suitable color, the simplest option is white. Drywall, even primed, absorbs moisture well, so it will have to be painted in two layers. You can cover the frame with self-adhesive film with a suitable pattern or color. Film is not the most practical option, besides, we recommend choosing a German manufacturer, since the Chinese one has too many problems with quality (it constantly peels off at the joints and in the corners).

Exterior view of a corner false fireplace in the living room

Upon completion of construction, the necessary parting should be installed in the firebox: a bio-fireplace or an electric fireplace. Interesting option with placing a photo frame inside the firebox, on which there will be an image of a real fire.

Candles in the firebox are always appropriate; they can be real or artificial, for example, in the form of a kind of garland that gives a pleasant flicker. Decorative firewood fits perfectly into this concept, which you can also make yourself or buy ready-made options.

You can build a corner false fireplace with your own hands not only from plasterboard; simple options, when the structure is made from ordinary cardboard boxes.

Cardboard version

IN Lately False fireplaces made from cardboard, in particular from suitable cardboard boxes, are very popular. It’s very convenient to make yourself a decorative New Year’s fireplace from boxes, which will support the festive mood, and then will be disassembled.

The best material for creativity is considered to be large boxes, for example, from under a TV, furniture, refrigerator or other large household appliances. Making a corner version is a little more difficult than a simple rectangular one, because here you have to rack your brains a little, developing the technology for cutting and gluing the box.

As always, the Internet will be a great help, where you can find relevant pictures or watch a suitable video. If we briefly consider the technology for constructing such a structure, it does not differ much from that described above.

Instructions for creating a cardboard corner fireplace

• At the first stage, we prepare a suitable box, cut it in the right places, bend it and secure it with tape or masking tape.
• Next, we paint it in the desired color or wrap it in paper to give the structure a monochromatic look.
• Decoration can be done again using paper; it is permissible to use polystyrene foam and plastic elements. If you have the ability to draw, then it is quite possible to apply suitable graphics to the outer part of the fireplace.
• By placing appropriate decorative elements inside and around the false fireplace, we get a finished look.

To recreate the flickering of a fire, you can put a garland inside an improvised firebox. Artificial firewood, which can be made from the same cardboard by rolling it into a tube, will help hide it. For greater realism, glue cardboard knots to the firewood. You can hide a bright garland using natural decorative materials, for example, by placing fir branches and cones in the firebox, and additionally placing candles.

As a last resort, you can simply draw a fire on paper and put this drawing in the firebox. It won’t be entirely elegant, but this idea will help support the overall concept of comfort.

False fireplaces in the interior (60+ photos)

Do-it-yourself false fireplace made of plasterboard

Living room in black and gold with a carved false fireplace

A modern interior will be complemented by a fireplace in a traditional style using stucco.

A place for read books - an empty fireplace opening

Natural materials will add warmth and comfort to even the most ascetic interior

An original solution - having a fireplace in the bathroom

On the fireplace shelf there is a collection of nesting dolls, photographs and grotesque paintings, and inside the firebox there is a wicker vase with branches

Fireplace niche as a closet. Can hold shoe boxes in it

You can place something unusual in the fireplace niche, for example, an antique chest

Logs for a false fireplace, painted in different colors to match the room

A disco ball will help fill the room with additional light. Place it in front of a window or lamp so it gives off glare

A small wall niche stylized as a fireplace hearth

A little trick to imitate a fireplace opening filled with logs

Symbolic false fireplace (painted fireplace)

It's more of a drawing on the wall than a full-fledged structure. It can be made from ordinary ceiling skirting boards, indicating only the form, without depth.

It’s easy to make a fireplace from polystyrene foam with your own hands, such decor is inexpensive, will decorate any room, and will give it coziness. Safe analogues of real live fire systems are easy to use and very beautiful. Complex materials are not needed for the work; anyone can master the technology if desired.

Pros and cons of a foam fireplace

A portal for a fireplace made of polystyrene foam is a practical, inexpensive, easy-to-arrange decor. It has the following advantages:

• low price;
• high environmental friendliness;
• ease of processing;
• low weight;
• durability.

The solution looks attractive, and does not lose its aesthetic and functional characteristics even over a long period of use. One person can make and install a fireplace design - all you need is compliance with the rules and skill.

Important! The foam cannot come into contact with fire, so there will be no flame. Alternative options for the fireplace are diode strips, light bulbs, closed candles.

A foam fireplace has its strengths and weaknesses

When heated, polystyrene foam releases toxic substances; sometimes prolonged contact with a conventional incandescent light bulb is sufficient. This disadvantage is relative, since it is leveled out through proper processing. You cannot spill liquids onto foam plastic; they will be absorbed and ruin its structure and appearance. Care products should be used specially, without aggressive chemical inclusions. The design has low resistance to mechanical stress.

Foam Fireplace Styles

Photos of a false fireplace made of foam will help you choose the optimal option stylistically. Style is one of the main factors that should be taken into account when performing work. It is desirable that the fireplace is in harmony with other components of the interior.

Important! A false fireplace made of foam plastic can become the main decorative accent in a room, provided it is used correctly.

Main options:

You immediately need to choose a place for installation, this will allow you to decide on the decor. At the same time, you can move the foam plastic structure around your apartment or house - it is light and mobile.

Important! A built-in burner is an excellent decor for a bio-fireplace made of polystyrene foam, the main thing is to comply with the requirements fire safety.

The style of the fireplace is selected for a specific interior

How to make a decorative fireplace from polystyrene foam with your own hands

Foam fireplace bricks can be purchased at a hardware store. What else is needed for arrangement decorative element, correct placement of accents - will be discussed further.

Fireplace made of foam plastic on a cardboard base

To create a portal on a cardboard base, use any box of suitable sizes, foam boards, decorative skirting boards or other decor. The tools you will need are scissors, a knife, glue, a brush, construction tape, a can of paint, and putty.

Procedure:

1. Prepare a drawing, immediately indicate the dimensions (width, height, length), transfer it to a cardboard base.
   
   The drawing should convey the future project as accurately as possible
2. In the areas where the hearth is located, make slits, bend the edges inward at the cut points, and secure with tape.
   
   You can use any box from large household appliances as cardboard.
3. Make a tabletop from plywood or polystyrene foam, fix decorative skirting boards.
   
   The more carefully the work is done with the base, the smoother the fireplace will be.
4. Apply putty, level it and wipe it clean, cover water-based paint.
   Painting a foam fireplace is best done outside the home, for example, in a garage or outdoors, if weather conditions permit.
5. Install a screen that simulates combustion in the fireplace hearth, or attach a garland, LEDs, or battery-powered candles.
   
   The future “flame” in a foam fireplace must meet fire safety requirements
6. Glue decorative bricks along the contour of the hearth placement, and apply a putty layer on top (it will create an imitation of unevenness).
   
   You can use ready-made elements as decoration

To obtain a complete image, it is advisable to cover the foam base with paint in the shade of brick. The combustion space is designed in the same way.

Retro-style foam fireplace

Do-it-yourself expanded polystyrene fireplace in retro style will look harmonious in an interior furnished with antique furniture. Scuffs and artificially aged surfaces are exactly what gives the solution original design antique

Stages of work:

It is most convenient to install the chest on a mantelpiece made using pallets. To simulate a hearth, logs are used. You can use a couple of old boards, but not rotten ones, and build a shelf out of them to preserve current abrasions, scratches, and errors. Above the fireplace cover, install false windows with vintage shutters, hang old photos placed in retro frames.

Important! A false fireplace covered with “artificially aged” paint looks especially attractive. It is optimal to choose pale gray shade, but be sure to let it dry.

Foam fireplace for the New Year

A false fireplace made of polystyrene foam with a themed decor will be an excellent decoration for an apartment or house. New Year. You can do it yourself, it won’t take much time, but you will have to be patient.

Procedure:

1. Cut a couple of rectangles 60*40 cm and a couple 40*20 cm from foam sheets (they are needed to create the sides).
   
   Since polystyrene foam does not adhere well to PVA, you additionally need to secure the parts with toothpicks - up to 4 pieces per cut.
2. Pin the side pieces to one of the rectangles with toothpicks.
   
   The joints should be pre-coated with glue.
3. Prime the seams, make markings on the inside for the firebox, and make cuts with a sharp knife.
   
   The thinner the blade, the more accurate the finished cut will be.
4. Secure the back surface of the fireplace with glue and toothpicks. Apply masking tape along the lower and upper perimeter. Prime the resulting frame and let it dry for at least 10-12 hours.
   
   If necessary, you can repeat the priming work, dry everything thoroughly, sand it using fine abrasive sandpaper
5. Soak the braid in PVA adhesive solution, press it onto the firebox cuts and prime the surfaces, dry for a couple of hours. Attach small decorations to the corners and cover everything with a gold layer.
   
   After priming the surface, let it dry
6. Secure the lid to the top of the finished box, prime the narrow sides again, and cover them with gold. Finish the firebox cuts in the same way.
   
   Gold paint coating is the basis of New Year's design
7. Leave the foam fireplace base open or place it on a rigid cardboard sheet.
   
   For decorative purposes, golden mother-of-pearl should be applied to the embossed surface of the braid, the cut of the firebox, and the ribs of the fireplace.

Let everything dry, wipe with a piece of soft cloth so that the paint gets into the recesses and highlights the relief pattern, and looks like natural wear on the ribs. You can make decoupage on the pediments of the fireplace made of polystyrene foam. To do this, snowflakes cut from napkins are glued using PVA glue, then coated with acrylic-based varnish. When all surfaces are dry, it will be possible to assemble the fireplace into a single structure.

Important! On the fireplace cover, provided there is no decorative tape, paint is applied directly to the sides.

New Year's fireplace decor made of polystyrene foam includes chains, toys, and decorative traditional boots that are hung near the firebox. Decorations are usually attached to multi-colored stationery nails. Cones, if any, can be used in their pure form or after being painted gold, this will make them even more elegant. You can also place soap cones in baskets, and put candles in a decorative improvised firebox different sizes and forms. Christmas tree decorations, sweets and boxes are usually placed on the mantelpiece. Sizes are adjusted to suit personal preferences. If you make a small false fireplace, it will even stand on Coffee table.

Conclusion

You can easily make a fireplace from polystyrene foam with your own hands in a couple of hours. This is a purely decorative piece of furniture; it does not involve the use of open fire. If you wish, you can complement the model with retro or New Year's decor using appropriate accessories. It will be more convenient to use a cardboard frame and stick foam boards on it. You can buy materials at any hardware store.