A floor made of sawn wood is a trendy finish option available for self-assembly. Do-it-yourself wood cut floor

19.01.2017 19:43

Furniture and interior decor made from a tree trunk, saw cut or branches attracts with its natural simplicity and beauty at the same time.
Interior items made of natural materials, saw cut, solid wood - it is the natural forms and textures of natural wood that are very popular and in demand among designers and homeowners today.

And it's not just about rustic interiors. Even a small rustic touch in the form decorative item from the trunk, whether it is a candlestick in the decoration of the table or even a bedside table made of real hemp or saw cut, will give the house a unique country charm.

Tree trunk, branches, saw cuts and cuts are often used in decor. Scandinavian interiors or country houses, for example, a chalet - so actively use this rustic decor in the design of such interiors. IN classic interiors traditional house and modern cold industrial interiors, loft, steampunk also add rustic accents to give the interior a little warm touch.

Tree trunk or branch décor has a soothing and simple charm of country living, being close to nature, giving a cozy and relaxing atmosphere.

This is the atmosphere of a cozy, quiet and measured life away from the hustle and bustle in the interior with a wonderful combination of natural materials, simple shapes, natural materials and fabrics, vintage details and simple décor with rustic charm.

A vivid example of this is a bed decorated with a birch trunk, a unique piece of furniture. self made rustic style, real decoration country house or rustic interiors.

The main value of the present design creation- This original idea and its creative embodiment, handmade. Unique furniture does not mean expensive, the most striking examples of unique designer furniture just prove it.

A tree trunk does not have to carry some functionality, in the end, it can be a purely aesthetic solution - it’s beautiful to rest the eye ... For example, a birch trunk is very decorative. I have already posted ideas for an interior made of birch and birch trunk, you can find more here -

A tree branch or thin trunk can be decorated with cute trinkets or on the occasion of a holiday.

Birch trunk fixed in doorway or above the window serves as a hanger for flower pots

A tree branch works great as a curtain rod.

Another fun way to bring a tree trunk into your home decoration is to hang it from the ceiling or in window opening. And this hanging Rustic decor can serve as a support for hangers.

A floor hanger made from a tree trunk in a bedroom or hallway will not only solve the problem of where to hang clothes or accessories, but will also become a nice accent in interior design.

A hanger made of wooden hooks from a trunk will come in handy in the bathroom or in the hallway, and, of course, in the kitchen - there are always a lot of little things that need to be hung.

Birch trunk as a charming base for a photo exhibition

As it seems to me, and I repeat it again, perhaps the inhabitants of the cities are tired of the cold modern materials, plastic, glass, concrete, laminate, etc. Many of us want a completely different atmosphere - simple comfort, something more natural, warm, sincere.

Enjoy interesting ideas creating furniture and decor from the trunk and branches of a tree with my own hands - maybe I can give you a charming rustic inspiration!

Home DIY Firewood Rack Ideas Nordic Home Decor DIY Birch Wood Home Decor

Natural tree branch and lampshade knitted from coarse yarn - floor lamp in rustic style is very simple and cozy, but at the same time elegant and stylish, you can’t buy this in a store - exclusive handmade!

A wall clock made from a large saw cut of wood is a cute and useful wall decoration.

Below we see flower pots wonderful in their simplicity:

The saw cuts are randomly glued on the wall - a natural planter will help you subconsciously relax and bring a country charm

The simplest do-it-yourself decor for the interior of tree branches can be done in a few minutes:

Functional decor from the trunk, convenient and simple:

Rustic wood decor looks amazing, elegant and simple, in table decoration for the holiday and in everyday decor - it can be a cake stand or a cut-out placemat, a candlestick from a trunk, coasters or hot coasters and even napkins.

As a bonus, a couple of ideas for needlewomen are such cute little things:

Kitchen decor and utensils made of birch bark, products made of birch bark for home sale- You can purchase amazing handmade birch bark products without intermediaries from master Elena Suvorova from the Kostroma region.

The use of natural wood in the interior allows you to create non-standard and stylish solutions. Material for decorating rooms is pre-primed and dried.

Saw cut tree in the interior allows you to feel the natural originality and comfort in the interior.

Wood decor adds comfort to.

A saw cut is an even and transverse layer of wood. Each of them is unique. Annual rings of wood are visible on each plate, the contours of which do not repeat.

Wood saw cuts are often used to decorate walls. Saw is easy to do. For this, a trunk or branch is taken and sawn into thin circles. Moreover, each plate is unique.

For wall cladding, the thickness of the layer does not matter. The bark is removed from the tree or left to create a natural style.

The decor on the wall made of wood is varnished, stained or painted. Decorative elements cover the wall or only part of it.

Decoration with wooden elements is done with glue. In order for the parts to stick to the wall, the surface must be flat and well cleaned.

1. Finishing is made entirely of wood or decorated separate part.
2. The head of the bed or a section on the wall is made out with a tree.
3. Any interior style is chosen. Recommended for hunting or rustic style. Looks.

In such interiors, natural material: log house, timber, bark and wooden boards of varying degrees of processing.

Wood is combined with decorative stone or with plaster. The following types of wood are used in the interior: spruce, pine, fir, ash, birch or oak.

After finishing, any saw cuts are varnished.

There are various accessories made of wood for the interior. A panel is often used, which is a composition of individual fragments of wood.

A panel is a certain decor in the form of a picture, which is made from saw cuts with or without bark.

Such a picture reflects abstract ideas. In the manufacture of panels, unprocessed parts of wood are used. The wood is prepared only from the gluing side to the wall.

Natural beauty is not only in the unique lines, but also in the shape of the cut. To create a picture, stumps, broken branches and remnants of wood are used.

The composition of saw cuts can be left intact or painted in colorful colors. An ornament is applied to the end parts of the saw cut. Similar designs are used as a frame for a family photo.

Saw cut flooring

The flooring is often made of wood, so saw cuts find practical use here too. Branches are not suitable for finishing floors. Registration is carried out using larger elements.

In this case, the thickness of the cut must be suitable for permanent loads. It is not recommended to use soft wood.

Floor finishing is more complex. The floor is tiled like ceramic tiles. When installing saw cuts, a special solution is used. After laying the individual elements, grinding is carried out to obtain a smooth surface. Then the floor covering is treated with varnish, which protects against dirt and abrasion.

Anything is created from wooden saw cuts. At the same time, designers are not limited to facing the floor and walls. Any decor items are made from wood, as well as furniture from tree cuts.

The following stylish accessories are made from this material:

1. Tubs, pots and vases for flowers. The material allows you to create the desired shape of the subject. For the original product, branches of small thickness are used. At the same time, small circles are cut out.
2. are being made beautiful shelves. The saw cut of a thick trunk is taken as the basis, which is polished and varnished. Shelves are made of such material, which are mounted to the wall using brackets.
3. For coasters for hot dishes, a saw cut of a large trunk is taken, from which the middle is taken out. Smaller diameter saw cuts are placed in the resulting opening. This creates an intricate pattern.
4. The clock is a useful and functional decoration. For manufacturing, you will need a real watch with a mechanism. In a thin saw cut of wood, a hole is hollowed out in the center, where the holder for the arrows is displayed. Then arrows are mounted to it. You can draw numbers, or you can do without them.
5. Frames for paintings and mirrors are pasted over with small cuts of branches of small diameter.
6. Elements for stylish wreaths. The hoop is pasted over with small cuts, which are decorated with cones or branches.
7. A functional element of decor is a hanger. It is made from saw cuts of medium thickness, which are inserted into a rectangular frame. Protruding fragments are mounted on saw cuts, on which a hanger is hung.
8. Original chairs and tables are made from saw cuts. At the same time, legs are attached to a thick round wood.

The use of saw cuts is gaining more popularity than.

Various stumps are used in the interior. A large stump with a cross section of more than 70 cm is installed in the living room as coffee table. Not so long ago, some furniture manufacturers began to produce a line of tables - hemp, which are covered with several layers of enamel and varnish. There are models made with the effect of gilding or patina.

IN trendy interiors hemp is used as a support for a table or for decorating a washbasin in the bathroom.

The cross cut of the trunk opens up wood cracks and makes the saw cut vulnerable. Therefore, to create decorative element saw cut is subjected to carpentry processing.

The crack gives a decorative appeal to the product. But if the saw cut is to be used as a functional thing, then the crack is a problem.

For the restoration of wood, the method of pouring with a special resin is used. First, the cracks are pasted over with paper tape. The resin is poured in layers and each layer is dried. After that, the saw cut is milled, and the excess solution is removed. The product is leveled in the plane and can be polished.

The material is then polished and treated with a special oil. After the procedure, the saw cut becomes smooth and even. It clearly shows the transitions of natural colors and growth rings.

Impregnation with oil helps to show the structure and patterns of wood. At the same time, it protects against negative external influences.

The birch cut is treated with wax. At the same time, the material acquires water-repellent properties and a beautiful sheen.

Oak is covered with water stain. This gives an extra shine to the product and a beautiful combination. color palette natural shades. The stained saw cut is additionally treated with varnish or oil. Saw cuts are painted in different colors.

Benefits of sawn floors

The saw cut floor is made from natural materials.
Relatively cheap.
Very beautiful and pleasant to the touch.
Easy to do (relatively).

Flaws

Unfortunately this is the type floor covering requires quite a lot of wood good quality therefore it is recommended to cover only small areas.
Saw-cut floors need to be serviced about once every 2 years.

What will be needed?

Kruglyashi 10-12 cm thick, sawdust, limestone, clay, linseed oil, beeswax, water, lard.

Note: it is important that the cuts are very, very well dried (not to mention work, no moisture).

The process of making such a floor is relatively simple and is very similar to laying paving slabs or paving stones. You need a solid, well-packed surface, on top of which we pour a layer of river pebbles (about 6-10 cm). Then, using a rubber mallet, we proceed to laying the saw cuts. We tap and check with a level so that the floor is even and none of the saw cuts stick out or go too deep. As a rule, after laying, the distance from the surface of the cuts to the level of the sand is about 4-7 cm, and the distance between the cuts should be approximately 1-1.5 cm.

Joint filling compound

For a floor area of ​​about 5 square meters in a 15-liter bucket for 1 kg of melted pork fat, add 1 kg of lime, 5 kg of sawdust and 2 kg of clay with water. After thorough mixing, you should get a pasty mass. You can also add marble dust.

We introduce the mixture into the distances between the cuts and rub it well, as far as possible, without leaving air pockets. She has to fill in the gaps. It is very important that there are no voids left, otherwise cracks and water leakage cannot be avoided in the future. Residues of this mixture can also be used to fill cracks in saw cuts (if applicable). After the last seam is smeared, we leave our floor to dry for 1-2 days. If cracks appear, fill them.

After complete drying (another day or two), we polish the floor from saw cuts well. Even scraping is recommended. You can rent a scraping machine to achieve the perfect effect. After that, check very carefully for cracks.

And finally polish beeswax and linseed oil.

p.s. And this is an old "pavement" of saw cuts, which the craftsmen gave a hexagonal shape (the shape of a honeycomb), it is over a hundred years old.

Please rate this post:

A personal plot is not only a place for growing potatoes, cucumbers and tomatoes, although I have no complaints about gardeners. But a beautiful exterior may be of interest to any owner of a country house or cottage, so the question of how to cut a tree with your own hands may interest you.

Exterior design - beautiful garden paths

Stages of arranging garden paths from saw cuts

There are many lumber from which you can lay paths in the garden or in the flower garden near a country house, these are shields, boards, timber or terrace board(parquet), although this is not solid wood, but a composite - sawdust with plastic (wood plastic). But the most attractive material, of course, will be log cuts, where the structure and growth rings are clearly visible. Below you will find step by step instructions for the production of fragments and their laying.

Harvested hemp

To implement such a plan, you will need a number of materials and tools, these are:

1. Lumber - logs for cutting into hemp.
2. Waterproofing - thick polyethylene, but geotextiles are better.
3. Loose building materials - pebbles, gravel (crushed stone), screenings, sand.
4. Level - preferably from a meter or more.
5. The cutting tool is a chainsaw.
6. Auxiliary tools - a rubber or wooden large mallet, buckets, bayonet and shovel shovel, brushes.

Stage number 1 - harvesting and processing of stumps

Harvesting stumps with a chainsaw

You should start the project with the preparation of the required amount of material, therefore, even before marking all the paths, you need to measure their total length and width in order to calculate the coverage area. This is very easy to do using the formula S=alength*bwidth, and then the average saw cut area S=π*r2, after which Stracks/Scut=xpieces - all that remains is to substitute the digital values. In order to find the average radius (r) of the cut, you need to measure the diameter (D) of the largest and smallest section of the logs, add them up, and then divide them into two. The resulting diameter is also divided by two and we get the average radius. For example, we take two diameters ø0.4+ø0.25=0.65 and divide by two: 0.65/2=0.325, which means that Daverage=0.325 m, and the radius r=0.325/2=0.1625 m, which means , S=πr2=3.14*0.162= 0.5024 m2 or rounded half a square.

For the manufacture of blanks, it is desirable to choose hardwoods that will last a relatively long time, for example:

• pine - 7 years;
• hornbeam - 10 years;
• oak - 10 years;
• larch - 25 years or more.

The bark must be removed

In addition to taking into account the type of wood, you need to pay attention to its condition, for example, large longitudinal cracks and / or damage by mold, rot, beetles will in no way contribute to an increase in the operational resource. When you pick up suitable logs, cut them into blocks of 15-20 cm, but it is advisable to stick to the same size (shorter stumps are poorly fixed during installation). If desired, you can also sand saw cuts, although this is not necessary.

Soaking the cut in an antiseptic

The ends of the saw cuts can be painted in any color you like.

When you have cut the required amount of stumps, remove the bark from them - there may be various pests such as woodworm beetles, bark beetles, shashels, etc. After cleaning, the wood should be protected from moisture and the best drug in this case, it is boiled oil drying oil (natural, combined "Oksol"). But working with boiling water, especially with oil, is quite dangerous, so many people prefer various antiseptics to oil drying oil - they also resist decay well and protect against pests.

After drying, painted saw cuts are treated with mining or bitumen

Impregnation and paint must dry

After drying the drying oil or antiseptic (this may take up to 2 days), treat the lower part of the hemp with bitumen, as in the photo above. For this purpose, solid construction bitumen, commonly known as bagged resin, is best suited. The resin is broken into pieces and melted over a fire (bonfire) in a metal container. The processed part of the chock will dry in a few hours, and the cut will be ready for installation. You can also soak the stumps in the oil, only it will not dry out anymore - you will have to install them.

Stage number 2 - marking garden paths

Garden path marking

Now about the sizes. In the event that a do-it-yourself garden path made of wood cuts is designed for one person, then 35-40 cm wide will be enough. But in order to be able to walk there together hand in hand, the comfortable width will increase to 100-120 cm, although such parameters are very rare.

It is very important to determine the route of all paths that should connect all buildings and recreation areas (, etc.). Laying lines, as a rule, have turns, zigzags and roundings. To display them on the surface, metal or wooden pegs are hammered into the ground, along which a nylon thread is pulled for a guide. A similar operation is performed on the other side of the track, indicating its width.

Stage number 3 - preparation of the base on the ground

Ground preparation

Now you need to separately cut the turf - it can be used for a plot elsewhere, but if you do not need it, then, of course, you can simply dig it up. So, according to the landmarks marked with threads, we dig a trench half a bayonet deep, not counting the turf, but you also need to take into account the length of the stumps - you will understand this in the process of describing the working steps. Try to keep the sides of the groove straight and strictly vertical - this is easy to achieve with a bayonet shovel.

Laying waterproofing film

To protect wood from ground water, waterproofing is covered at the bottom of the excavated trench and it is best if it is geotextile. But how a budget option you can also use dense polyethylene, this is 150-200 microns (microns). If the seller does not know the thickness of the material, then you can focus on its suitability for the device and. When you plan to install a wooden curb (stumps spread along the log, thick boards, stones, etc.), then the waterproofing should be wrapped on the walls of the trench or even a little higher (the excess will be cut off).

A pillow of sand mixed with gravel or crushed stone (can be screened without sand) is poured over the waterproofing film with a height of 2.5 to 5 cm and leveled with a rule to the level. This layer will absorb water that will fall between the logs to the bottom of the trench. So what does it give? Everything is simple and logical - moisture falls down under the influence of gravity, but does not linger at the base of the chocks, penetrates into the absorbent layer and after a while diverges to the sides into the ground, and part of it evaporates.

Stage number 4 - installation of hemp borders

Installation of hemp borders

In this case, a stump border was chosen, although you can edge the path with other material, the main thing is that it is combined with cuts and the exterior as a whole. But in the event that you still decide to do it with stumps, then choose the thinnest of the cut blanks, but it is desirable that they all be about the same diameter.

To make a border with the selected saw cuts, you need to set them firmly in a vertical position on each side of the trench, as shown in the top photo. Waterproofing on the wall will protect them from ground moisture, and a sand and gravel cushion from water that accumulates during precipitation. The height of the block of wood above the ground after its laying should be about 3-4 cm.

Note. The border is not an integral accessory of a garden path made of saw cuts in a country house or country house. This element, so to speak, is voluntary.

Stage number 5 - pour another pillow

The second pillow consists of one sand

On top of the sand and gravel layer, another pillow is poured from one sand 5-10 cm high - the longer the hemp, the thinner the pillow. If you know what is under paving slabs and as it is done on the street, the real backfill is almost identical, only it is made from sand, and not from screenings and cement. Be sure to level the sand with a rule and a horizontal level - this will make it easier to lay saw cuts in the garden.

I want to make a small digression. The second pillow can be filled up even before the curb is installed, and then the edging will turn out at the same height as the rest of the stumps. There are no regulations or clear instructions here, since such sidewalks are not mentioned in any of the GOST or SNiP, therefore, TU (technical conditions), as such, does not exist here and it all depends on the imagination and desires of the installer.

Stage number 6 - laying wood cuts

You can leave gaps between slices or fit them close to each other.

At this point, you need to place all the cuts in the trench you have dug so that they are 3-4 cm above the lawn. The order or placement of the logs does not matter at all - now the main thing is to create stability, and you can leave gaps between the slices or fit them close to each other.

Hemp is hammered into the sand with a rubber mallet

In order for the logs to stand tightly in relation to the surface, and their upper ends to be at the same level, the stumps are hammered into the sand with a rubber or wooden mallet. In this case, it is better not to use a locksmith (steel) hammer, since it will not only leave dents on the saw cut, but cracks may also occur. If you have nowhere to take a mallet, then, of course, use a hammer, just hammer the cuts through the gasket (a piece of board, bar or slats). Constantly level the surface of the installed fragments with a building level.

Stage number 7 - the final stage of the installation of stumps and the design of the track

The space left between the stumps is filled with sand, screenings or fertile soil for grass

In any case, there will be space between the cuts of the logs, even if you stack them very tightly - this is a feature of the round timber. The cavities should be filled with loose building materials such as sand, granite screenings or crushed stone, after which it must be tamped, otherwise it will sag under the influence of precipitation.

Design methods: 1) multi-colored ends; 2) grass between saw cuts; 3) coarse gravel between cuts

Let's move on to the final touch of the device from the saw cuts of the tree, which we have already made with our own hands. The selection of photos above shows three design options, although in fact there are many more, but it already depends on your imagination.

The gaps between the stumps here can be filled with sand or granite screenings. But the highlight, as you can see, is the multi-colored ends of the cuts - water-repellent paints are used for this. This design of the path at the playground is just a gift for the child.

The second option provides for undersized () grass. To do this, after backfilling in the cavity of sand or screening, leave 4-5 cm to the surface of the ends, tamp and fill the remaining volume with fertile soil mixed with seeds

Here, coarse gravel is covered between the stumps, as this distance allows. But in such cases, sometimes they go the other way - instead of gravel, painted crushed stone is poured, which looks very beautiful and original.
Below is a training video on the installation of a track from log cuts:

Video: Care garden path from wood cuts

A garden path made of wood saw cuts needs to be looked after, yes, yes, exactly looked after, otherwise it can turn into a path that is being laid through a swamp - trampled and dirty. Dirt will collect at the ends of the stumps, and it will appear there even if you very rarely use this route or do not go there at all - there is always dust on the street. Therefore, at least once a month, sweep the garden paths with a brush, and if necessary, wash them with running water from a hose.

In the event of the appearance of pieces of dirt (even animals can leave it), it is better to use a scraper, that is, an ordinary metal spatula with a blade cut to 3-4 centimeters. It is undesirable to use a metal brush, as it will spoil the texture of the cut.

Once a year or every few years (depending on the intensity of movement in the garden), the saw cuts must be covered with an antiseptic or water-repellent paint. As a rule, these are acrylic or latex coatings for outdoor use - they cost more than usual, but the operational resource fully justifies the money spent.

Pros and cons

Original design: saw cuts, ornamental plants and painted gravel

Positive feedback from optimists:

1. the device of such tracks is inexpensive;
2. speed and ease of installation;
3. no need to hire someone to work;
4. looks natural;
5. endless design possibilities;
6. you can use used logs after dismantling any structures.

The faster industry develops, the more man tries to get closer to nature. He surrounds himself with nature not literally, but by creating the illusion of being in the air, even if he is relaxing in the living room. This desire is not just to live in a house that is built from natural raw materials, but also to come up with an appropriate interior design. Therefore, everyone strives to use hand-made wood decor in their home in order to feel like a real owner.

The fashion for wood appeared a long time ago, but now not everyone can furnish their own home in the style of the Twin Peaks series. The room should not be oversaturated with wooden furniture, furs and animal heads. This already speaks of the bad taste of the owners. These blanks are available for the forest area, but for the steppe - decorating a house in this style will cost a pretty penny. There is an option to dilute the familiar environment with rare interspersed with wooden saw cuts, which pour into absolutely any image. You can create such a design yourself, spending only on fasteners.

Advantages of decorating the interior with wood saw cuts

The saw cuts of a tree surprise at the same time with their external attractiveness and the complexity of creating from a technical point of view.

Now let's figure out what advantages wood trim has:

• Durability. If the wood can be properly processed, and will be protected from moisture and various mechanical damage, then it will last a long time. If it's whole wooden wall or floor, then you can save on annual repairs.
• Thermal insulation. Firewood is a source of heat not only in a fire. The raw material has the ability to keep the temperature, so for a cold concrete apartment it is best view insulation, albeit partial. In winter, such an insulated floor will warm any legs.

decorative tree from branches

• Uniqueness. Of course, you can glue wallpaper with the image of tree cuts, or lay a laminate, but in such pictures a pattern is used - a simple repetition of one module. natural finish cuts is a composition where each element is unique. The pattern on the saw cut and its shape are unique.

Create a design wall

For decoration, it is advisable to choose one side of the room. The design of all planes is a sign of bad taste, and the room will look overloaded. Any room needs to be given air, and it's not about the windows. It should breathe space, and this effect is given by light empty planes. Only one “woody” facet of the room will become a kind of accent that will become its mood. You can lay out the "tree puzzle" yourself, and now let's talk about how it's done.

Everyone in the yard has an already withered tree that needs to be removed. Now it's time to cut it down. We take a branch, saw it into bars of medium thickness. From the resulting "pancakes" you can remove the bark, and then polish it. Thanks to this, you will not drive the thorn by touching the wall. The resulting wood layers should be processed special means from insects, and then we put it on glue. It is advisable to varnish the resulting relief - varnished wood can last a long time.

On a note! Create a composition from branches of different sizes, starting from a massive trunk and ending with the thinnest branches. The composition breathes due to the formed voids between saw cuts of different sizes.

Wall panel - a piece of nature in the interior

You can meet a panel from any components, but you have not seen a canvas made of pieces of wood, right? Here, contrasts are welcome, so feel free to use even hemp. The picture should not look like a pattern, but a full-fledged composition with a dominant and secondary elements. Do tonal gradations, and place accents with the help of tone. Specifically for the proposed product, it is better to leave the bark - it will make it more attractive. The careless terrain will create the atmosphere of an endless forest, and move you into it.

It is advisable to sketch a rough sketch, but if you like to improvise directly in the course of work, then go ahead. For bright contrast assemble the frame of the canvas from simple planks, this will give the picture lightness. The saw cuts are sanded from the side that is adjacent to the wall for better bonding. Leave the other side untouched - this will give naturalness to the overall picture. Framed tree cuts in the interior will look like a window overlooking the forest. The frame collects the composition into one whole, and groups it.

Difficulties in laying out a modular floor

This type is quite complicated, so it is better to be patient and get to work. Choose thick trunks to avoid creating large voids when laying out circles. For the manufacture of the floor, hardwood logs are selected, because the floor is exposed daily.

There are two reasons that will make you sweat:

• Solution. If you put all the parts on glue, then the floor will not last long, even if you cover it all with varnish. Modules will fall off due to constant pressure. You will have to use a solution, possibly based on cement.
• Surface leveling. If the thickness of each element does not play a big role in the design of the vertical plane, then this is the main condition for the floor. It is necessary to adjust all the modules to the total thickness, and start grinding after installation. The procedure will take a lot of time, because it is not easy to achieve a smooth surface.

Next, start varnishing the finished surface. It will protect it from pests and external influences. The floor is easier to clean, and it will last longer in a “protected” state. An unprotected surface can be attacked by pests or simply begin to rot due to excessive moisture.

Creating home comfort with homemade furniture

Furniture looks completely different, depending on the type of raw materials available. Tables and chairs are made, since the silhouette of the cut itself already resembles a small table or chair.

There are two main principles for creating furniture:

• Modular - assembly of an element from small parts (modules). Actually, we are already familiar with this method. It allows you to create a product of absolutely any shape. It is also necessary to achieve a perfectly flat surface. Dishes will be placed on the table, and so that it does not turn over, the surface of the table must be perfectly sanded.

• Solid - a solid element is taken as the basis. This option is much simpler than the previous one in technical terms, but it is more difficult to find a bar with a large diameter. Things are better with chairs, and if you want a table at which the whole family would have dinner, you will have to tinker with finding a saw cut. large diameter. The price of the overall cut is quite large.

It doesn’t matter which principle you apply in creating a product, the main thing is to immediately evaluate your capabilities so as not to spoil the material. Any way is good, because wooden furniture renowned for its strength and durability.

Ideas for the kitchen based on semicircular cuts

Such a figure is an unusual piece of decor and a reliable assistant in the kitchen. The material withstands high temperatures and does not heat up so much. From saw cuts, you can create simple solid coasters and modular ones, the material of which is easier to find. Everyone saw such coasters in the store, and thought “No, you can’t do this yourself” - an erroneous opinion. Why pay more if you do it yourself?

The kitchen will be complemented by fancy semi-circular shelves that can be put together from solid wood cuts, dividing them into two parts. An illusion is created that the "kruglyashek" is in the process of sinking into the wall. The reception is interesting if the shelf is round, thanks to this, visual movement is created. The effect is achieved due to the dynamic relief on the bark. On the shelves harmoniously placed cookbooks, or personal collections of recipes of the hostess. And the product will withstand a sufficiently large weight, even if its dimensions may not inspire confidence.

Remember! If this is a stand specifically for dishes, then it is better to make it whole. Connecting small parts involves gluing, and glue is incompatible with high temperatures. The stand will simply fall apart into several pieces.

Wooden detail as an accent in the interior

Small inclusions of "forest" in the familiar environment mentally bring you closer to nature. Saw cuts in the interior are used as a decor, and perform certain functions.

We create fancy accents with our own hands:

• Watch. The unusual use of a wooden saw cut in any interior looks cute. Especially if it is an uneven circle with bark on the surface. The bark is fixed, because it is able to deteriorate over time. The more casually the wooden “pancake” looks, the more interesting the watch will turn out.

• Flower vases. Let your imagination run wild and use different kinds branches. An ornament made of small twigs created by oneself looks expensive, and no one will guess that the vase cost you a penny. It will be in harmony with the design, and will find a response in things with a similar decor.

Remember! There should be few things created from identical material in the room. They should overlap with each other, but not look like "brute force".

• Frames for mirrors. In creating a product, it is important to adhere to rhythm or metricity, but chaos will be inappropriate. Alternate large tree cuts with small ones, or make the entire frame from circles of approximate size. Either option will be correct.

It is quite possible to make a floor from saw cuts with your own hands. Not to mention small interior items that are made in a minute with wood, glue and your imagination. Surprise your friends with a tastefully decorated home and make your life more comfortable. It is an environmentally friendly product that will benefit your health. If the product is made of needles, then a slight coniferous aroma can even help you with the treatment of a cold.

If you can handle the floor, then decorating an entire wall with wood will seem like a matter of five minutes. You will need to use your own taste, and your knowledge of composition, although most people trust their instincts.

Everything will work out, it’s enough just to “assemble” these products and fix them with glue, or just cut out a solid object. Create an image in your head, and try to bring it to life. You do not need special knowledge or skills, follow the basic rules for choosing materials and processing tools. After all, why spend a lot of money on the work of a designer, if you are able to cope with this task on your own without spending a dime.